Pressure Washing Savannah GA is a classic move to do around the summertime. But what do you need to know before you do it? There are a few things that you will need to consider before you begin. This article will give you a few things that you will need to know before you do this process.
It will help to have your own personal criteria. However, when you are looking to do this task, you will want to consider the following things. Let’s look at some of these.
Your deck needs to be in good shape. This means that there is no debris on the deck. Dirt, leaves, leaves that you have raked off the deck and is not going to be so dense that it will prevent pressure washing. Your deck needs to be clean and dry and you should have found a dry place to do this process.
The pump that you are using will be one that uses a puller. You will need to be able to get the pressure up high enough to wash the deck. The reason for this is because some chemicals can cause the pump to trip. The chemicals do not always stay down.
If you are using a pool pump, then you will also need to use a wide and shallow drain. To test this, use a hose and the hose should be running out of the sink. If the hose does not stay down, it is possible that your chemicals have gone down the drain and into the pool.
If you are using wood finish on your deck then you should do it. This will help to improve the moisture conditions on the surface-wood finish.
Pressure washing decks need to be done when they are not raining. Many people will wash the decks when they are rain or cloudy. Not only will this mess up the chemicals that are in your deck but it will also make it more difficult to wash it.
You will need to let the wood finish dry to the point that you can do pressure washing. If you have chemical hardeners in your deck then you will need to apply pressure when you water the deck.
You will also need to use rubber stoppers and stop scumming. If you are using a rubber stopper then you will have to remove the stopper and let it soak in hot water for several minutes. Then, after it has soaked in hot water, clean the stopper and then pressure wash it.
The soil must be drained, do not let it get wet. If the soil comes to the surface of the pool pump then the chemicals will quickly move down the drain and into the pool. So be sure that you drain the pool pump dry.
Pressure washing a deck should be fun but also should be done correctly. Take the time to learn the process and to ensure that it is done the right way. This will ensure that you are doing this process properly.